Skip to content

Roofing Livermore, California

Roofing Contractor in Livermore, CA

Roof replacement and repair executed as a complete system — decking, underlayment, flashing, ventilation and finish material.

A roof leaks at its details far more often than at its field. Valleys, penetrations, wall intersections and edge metal are where water finds its way in, so that is where we spend the time.

We inspect the decking once the old material is off, correct what we find, and install underlayment, flashings and ventilation as a system before the finish material goes down. What we replace and why is documented as we go.

Newly installed architectural shingle roof with clean flashing details

What the work includes

Handled properly, in the right order.

Tear-off and inspection

Existing material removed and the deck inspected for rot, delamination and fastening problems.

Underlayment and flashing

Water barrier, valley metal, step flashing and penetration boots installed to manufacturer detail.

Ventilation

Intake and exhaust balanced so the assembly breathes and the attic is not cooking the roof from below.

Cleanup

Property protected during tear-off, debris contained, and the site magnet-swept before we leave.

Project types

Work homeowners bring us.

Typical roofing projects we take on across Livermore, Pleasanton, Dublin, San Ramon and the wider Tri-Valley.

  • Full roof replacement
  • Leak diagnosis and repair
  • Decking repair and re-sheathing
  • Flashing and valley correction
  • Attic ventilation improvements
  • Gutters and drainage

Our process

From vision to completion.

The same four stages on every project, so you always know where things stand.

  1. 01

    Consultation

    We walk the space, listen to how you use it and define scope, priorities and realistic budget ranges before anything is promised.

  2. 02

    Planning

    Selections, sequencing, materials and schedule are documented so expectations are aligned before the first day of work.

  3. 03

    Construction

    Clean, protected job sites and coordinated trades. Progress is communicated and quality is checked as the work advances.

  4. 04

    Final Walkthrough

    We review the finished work together, address every detail on the list and hand over a project that is genuinely complete.

Questions

Straight answers.

Do I need a full replacement or just a repair?

We inspect first and tell you honestly. Isolated flashing or penetration failures are often repairable; widespread granule loss, brittle material or deck damage usually means replacement.

How long does a roof replacement take?

Most single-family homes are a matter of days once material is on site, weather permitting. We give you the schedule before we start.

Can you find the source of a leak?

Yes. Water often travels well away from its entry point, so we trace it back to the actual failure rather than patching the stain.

Do you replace gutters at the same time?

We can. Handling gutters and edge metal with the roof means the water management works as one system instead of two separate jobs.

Areas we serve

Based in Livermore. Working across the Tri-Valley.

Our office is on Walnut Street in Livermore, and most of our projects are within a short drive of it — through the Tri-Valley and out into the East Bay.

Primary service area

Livermore, California

Our home city and where our office is based, on Walnut Street.

  • PleasantonTri-Valley
  • DublinTri-Valley
  • San RamonTri-Valley
  • DanvilleSan Ramon Valley
  • AlamoSan Ramon Valley
  • BlackhawkSan Ramon Valley
  • FremontEast Bay
  • Castro ValleyEast Bay
  • Walnut CreekEast Bay

Next step

Tell us what you're planning.

Send the scope and timeline, or call us directly. K&M Properties Inc. is a licensed California general contractor, CSLB #1158878.

CallRequest Estimate